MTM Hydro PF22.2 Foam Cannon   MTM Hydro's Italian Manufactured PF22.2 Foam Cannon is the new standard in the foaming industry and stands alone as the most reliable foam Cannon in the industry. With its new standing bottle you no longer have to worry about spills and tipping over. Whether you are foaming down your car on the weekend or you are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money.  Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical in the calibrated standing bottle and you are up and running. The MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the Chinese knock-off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required. NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. We now offer this new Low Profile QC plug under item #24.5006. Once you install the correct plug in your new MTM Foam Cannon, you will see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufactures try to change their fittings! Contents of the PF22 Foam Cannon Kit:   Italian Nickel Plated Brass -Single Cast Foam Cannon body Italian Calibrated 32 oz New Stand up Grey Bottle 1/4" x 9" tube for drawing chemical 3.5 Orifice (1.25mm) installed in the Foamer Body 3.0 Orifice (1.1mm) included with kit Fitting pack (2-pieces) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug Manual with care instructions and exploded viewSpecs: Min. 1,100 psi - Max. 5,000 psi Min. 1.4 gpm - Max. 5.3 gpm Max. 140°FNote: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

Read more less

MTM Hydro Magnum28 Foam Cannon Kit with Stand Up Bottle   MTM Hydro's Italian Magnum28 Foam Cannon Kit has the newest Foam Cannon in the Industry paired with the newest Spray Gun in the industry. The stylish and robust SGS28 Spray Gun with integrated Stainless Live Swivel is now paired with Stainless fittings and the PF22 Foam Cannon to give you a premium Italian Foam Kit that is unmatched by any other. Complete with the New Stand Up bottle, this kit is unrivaled. Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money.  Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The snub style Magnum28 Kit allows you to fit in tight spaces when cleaning and eliminates reaching 40"" away to adjust your cannon settings. The MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the chinese knock off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required. NOTE To install on certain models of pressure washers such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See 24.0481 and 24.0448 to adapt to these models. *Note*This Product is only meant to be used with with the MTM Hydro Foam Cannon. Improper use or installation of a QC nozzle at the Spray Gun outlet is forbidden as this may result serious harm or injury. For proper use, once you complete your foaming, install an extension lance at the gun inlet for wash down. Contents of the Magnum28 Foam Cannon Kit:   Italian Brass Foam Cannon body Italian Calibrated 32 oz Grey PF22 Stand Up Bottle 1/4" x 9" tube for drawing chemical 3.5 Orifice (1.25mm) installed in the Foamer Body 3.0 Orifice (1.1mm) included with kit SGS 28 Spray Gun wth Integrated Stainless Live Swivel 1/4" Male Stainless Coupler - Gun Outlet 1/4" QC Stainless Steel Plug - Cannon Inlet 3/8" QC Stainless Steel Plug - Gun inlet - 3/8" M22 (14mm) Plug - Optional Gun inlet fitting Teflon Tape for installation - 6 Wraps per fitting Manual with care instructions and exploded viewSpecs: Min. 1,100 psi - Max. 4,000 psi Min. 1.4 gpm - Max. 5.3 gpm Max. 140°FNote The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.Foam Cannon Replacement Items and Upgrades: 5.0 Orifice (1.5mm) - Part #36.0235 6.5 Orifice (1.7mm) - Part #36.0236 Replacement White Bottle - Part #37.0253 Replacement Grey PF22 Bottle (New)- Part #37.5022 Replacement 9" Suction Tube - Part #41.0338 Replacement Filter - Part #36.0226 Repair Kit for Original Foam Cannon including O-Rings - Part #41.0400 Repair Kit for PF22 Foam Cannon including O-Rings - Part #41.5001 1/4" x 33' Hose for Foam Jet Kit with Chem Filter - Part #41.0401   

Read more less

Selector Valve For Foam Cannon & Rinsing   This selector valve provides a two-way shuttle valve system in a sleek light weight style. It is full shut-off when engaged on one side or the other which offers full pressure on the left or right side. This cleaning method is perfect for a consolidated gun and lance system that is popular among detailers for its compact design. Derived from the Italian word for 'Middle,' this valve serves as an intermediary two way system, replacing the need for a three-way ball valve and allows the user to keep their foam cannon and nozzle in one place.    Max temperature rating at 176° Max 3700PSI Max 8 GPM  

Read more less

Bucket Bracket - Foam Cannon Holder   Got the bucket? Got the PF22 foam cannon and a spray gun – but don’t want to set the foam cannon on the ground? Use this handy bucket hanger when you’re not washing and turn your bucket into a caddie! Or, mount the bracket to the wall and use it for storage. But wait, there’s more! The Ventuno Bracket can hold more than a foam cannon, it can hold spray guns, lances, or any Veloci accessory you can think of – or even maybe your favorite ballcap. The coolest feature of the Ventuno is that this bracket is made up of two interlocking 12-gauge Italian stainless-steel pieces, allowing you to use it as a bucket hanger even when mounted to the wall. Simply lift the forked piece up and off the mounted piece and place on the corner of a bucket – and vice versa – It’s that easy! For temporary storage or while your hands are full, the PF22 foam cannon can hang securely on the bracket alone, or as a foam cannon and spray gun duo. Specifications   12 Gauge Italian Stainless Steel Two piece construction Mounting hardware not included Recommend 7/32” mounting hardware, type dependent on mounting surface    

Read more less