** PICTURES SHOW A REMCO PUMP BUT THIS SYSTEM COMES WITH A 12V DELEVAN SOFT WASH PUMP** CHOOSE PUMP SIZE** This robust soft washing system consists of the highest quality components with no shortcuts taken.   INDUSTRY LEADING PUMP DESIGNED FOR SOFT WASHING Our Premium 12V Soft Washing System is available with your choice of a 5 GPM 100PSI or 7 GPM PSI Delevan Soft Wash Pump. You also have the option to add an extra soap valve.  • Neatly mounted on an aluminum plate with HD waterproof switch  • Pre-wired with 6ft of battery connection (positive & negative, 10 AWG)   CLEAR VIEW CHEMICAL METERING MANIFOLD WITH CHEMICAL RESISTANT VALVES & FLUSH/AUXILIARY VALVE  • Comes standard with 4 port clear view manifold (3/4”-1/2”-3/4”-1/2”) with a 3/4” through hole and end ports. The second 1/2” soap port is plugged with a 1/2” plug unless you add the second soap valve option. The clear material enables confirmation of product flow and helps with troubleshooting and locating leaks.• Our Premium 12V Soft Washing System comes with DOS/SM Series Metering Valves that are made of completely chemical resistant materials, seats and seals. These valves have a 180 degree handle turn for the most precise chemical metering.  • This soft washing system comes standard with a chemical resistant banjo 3-way valve with heavy duty stainless mounting pieces, ready to be bolted down. This valve is used for flushing your system after each use or for spraying chemicals other than bleach. This can also be used to transfer bleach onto your rig.    HEAVY DUTY ALUMINUM STAND  • Height - 30” • Width - 15.5"   COMES WITH SUCTION HOSES, FILTERS, UNISEALS, & HOSE CLAMPS • 50ft of 3/4” heavy duty suction hose  • 20ft of 1/4” poly braided soap hose  • 3 chemical resistant slotted PVC filters  • 1/4” soap filter (2 if you choose extra soap line option) • 2  uni-seals for the 3/4” bleach and water suction hoses to neatly pass through your poly tanks • Uni-seal for the 1/4” soap hose to neatly pass through your poly tank (2 if you choose extra soap line option)  • Pack of 20 heavy duty hose clamps to fit 3/4” and 5/8” hoses • 2 hose clamps to fit 1/4” hose (4 if you choose extra soap line option)    *** OPTIONAL 18” ALUMINUM RUGGED REEL OR TITAN HOSE REELS, 200ft of 5/8” SOFT JET SOFT WASH HOSE, & TRIGGER GUNF ASSEMBLY

Read more less

The Spray Pro Mini Pressure Washing & Soft Washing Skid is a super capable, compact, two in one pressure washing & soft washing system that can be truck, trailer or van mounted. This professional grade pressure washing and soft washing skid to allows you to clean efficiently with a small foot print. Absolutely no corners were cut when designing this system.  The Spray Pro Mini Pressure Washing & Soft Washing Skid includes: Aluminum pallet skid with fabricated back shelf 48”wide and 52” long measured from the bottom Approximately 650lbs dry Honda belt drive 5.5 GPM pressure washer (choose electric or pull start Two 55 gallon tanks for water and bleach with aluminum straps  7 gallon soap tank for surfactant with aluminum straps Asahi valve 4 Port soft wash metering system with clear manifold. 1” manifold with 3/4” and 1/4” chemical rated Asahi valves. Mounted neatly to aluminum stand. This allows you to select from or blend water, bleach, surfactant, and an additional valve and auxiliary suction hose for various solutions like bleach neutralizer, caustic degreasers, house wax, etc.  Banjo flush valve to flush the bleach valve with water after each use. This feature significantly prolongs the life of your soft wash metering manifold.  Delevan 7GPM 100PSI 12v soft wash pump mounted neatly to aluminum stand and pre-wired. Comes with an empty battery box to fit a group 24 deep cycle marine battery. Battery needs to be purchased locally. Down stream system with 3 Port DS PRO metering manifold with high quality Asahi valves for selecting or metering bleach and surfactant, and an additional auxiliary valve for various solutions like bleach neutralizer, caustic degreasers, house wax, etc.  Banjo micro flush valve to flush the DS Pro manifold bleach valve with water.  This feature significantly prolongs the life of your metering manifold 18” aluminum full frame reel with 3/4” stainless manifold  for soft washing hose & 12” aluminum full frame reel with 1/2” stainless manifold for high pressure hose 200’ of 5/8” soft wash hose & 200’ of 3/8” high pressure hose. 50’ of garden hose neatly stored on aluminum hose holder  Water drain system Hudson float valve system Poly soft wash gun and stainless nozzles Soft wash hose is set up on a camlock system so you can add hose as needed and switch attachments (extension hoses and extra trigger gun attachments sold separately). DN10 ball valve installed on high pressure hose Suttner high pressure trigger gun Matrix nozzle holder allows you to press red or blue buttons and quickly switch between M5DS twist nozzle and shooter tip. 

Read more less

  **** PLEASE NOTE. The Pictures used are not of the current pump. Other than that, all other components will ne the same *** This is the most capable, compact spray system in the roof rejuvenation, agricultural and pest control industry. Suction Side  The 3 way Viton valve on the suction side gives the operator the option to draw from either the solution tank or their rinse line. Both the solution line and rinse line come with chemical resistant, slotted, poly filters. The solution line is 10ft long and the rinse line is 20ft long. Both are premium, 3/4” non collapsable suction hose. The solution line also comes equipped with a uniseal tank gasket to neatly secure the solution line and filter in your tank from the top side. This system also comes with a PVC sleeve pipe to weigh down and stabilize your filter to keep it from rising to the top. Their are no metal fittings on the filters. Everything that goes into the tank is 100% chemical resistant poly. The rinse line can also be used to transfer chemicals from a bulk tank to a solution tank. If you select the metering manifold option for soft washing, the 3 way valve for flushing will be installed on the SH line of the metering manifold.  Pressure Side The bypass line is 20ft of 1/2” clear poly braid hose with a ball valve and cam lock system that connects to the top of the tank. The bypass line will circulate your chemical solution in a loop through the system while you are off the trigger and bypass any excess solution while you are on the trigger. This helps keep your batch mixed solution mixed throughout the application process.  3.6 GPM 60 PSI AC Delevan Bypass Pump This system comes equipped with a 3.6 GPM 60PSI AC 115v (Plug In) powered pump. This chemical rated Delevan pump is pre-wired and neatly mounted to an aluminum plate.  HOSE REEL The Spray Pro 12V Application System comes with a full-frame 12” aluminum Rugged Reel with a stainless manifold. This reel is designed to hold up to daily use with corrosive chemicals.     APPLICATION HOSE  This professional sprayer system comes with 200ft of 1/2” Soft Jet Premium Chemical Resistant soft washing hose that is rated for 300 PSI. This robust application hose is UV & ozone resistant, non-marking, & lightweight. This hose meets RMA (Class B) oil resistance.  APPLICATION WAND  The wand consists of a ball valve, trigger gun, 18” wand and stainless J-rod with 4 stainless steel nozzles (0,15,25 and 40 degree 1/4 meg nozzles in #20 orifice. The zero degree nozzle is used to achieve the longest spray distance of approximately 40' while the 40 degree nozzle sprays the widest fan pattern for up close applications.  The application wand is able to be disconnected with a chemical resistant ball valve and camlock fitting and neatly mounted to the front of the Spray Pro 12V Application System. Being able to disconnect the wand allows for the operator to use our different wand set ups or even transfer chemicals to tanks and pump sprayers that are far from the spray system.    OPTIONAL ADDITIONAL HOSE The Spray Pro 12V Applicator System is set up with camlocks right before the application wand allowing the operator to add extra hose runs if ever needed for larger jobs that may require an extra 50-100ft whip line. We have  either 50 or 100ft application hose extensions available with pre-installed chemical resistant cam lock fittings. NO SHORTCUTS ON COMPONENTS All fittings used on this professional grade spray application system including the hardware are either poly or stainless steel. We do not cut any corners on quality. This system is designed for daily, industrial use. Our system was designed by professionals to be used as a roof rejuvenation spray system, a pest control spray system or agricultural spray system but can also be used for many other solution spraying applications.    ASSEMBLY  The Spray Pro 12V Application System comes tested with water and ready to use. All you need to supply is the tank. You will need to install the provided bulkhead fitting to the top of your solution tank. 

Read more less

The Enchilada is a two in one soft washing and power washing skid that allows you to do a little bit of everything from one compact, highly capable, and premium system. 12" U-Frame Stingray™ Hose Reel (Soft Wash): 200 ft 1/2" Clear Braid Hose 12" U-Frame Stingray™ Hose Reel (Pressure Wash): 200 ft 3/8" Pressure Hose Bleach Tank: 50 Gallons Water Buffer Tank: 50 Gallons Soap Stinger Hose: 3/8 inch Reel Stand Lite w/ Extension: Lower Skid Unit: 42 inch Tank Straps: 3 inch Soap Metering Valve: 3/8 inch G.F. DN10 Bleach Metering Valve: 1/2 inch G.F. DN15 Soft Wash Pump: 5 GPM 12 volt 90 PSI Float Valve: 3/4 inch Hudson Power Washer: 5 GPM Belt Drive 3500 PSI Length: 45 inches Width: 58 inches Height: 49.5 inches Weight: 478 lbs

Read more less

Control Panel:(4) GF Metering Valves Bleach Valve:1/2 inch Metering Valve Soap Valve:(3) 3/8 inch Metering Valve Power Switch:Marine 2 Option Battery Switch Pressure Guague:Stainless Steel Disruptor Manufacturing Volt Meter:LED  Red LED:Power Light Green LED:Pump On Light Pump:12 volt 5 GPM Hose Reel:15" Manta Electric w/ 1/2 Clear Braid Hose

Read more less

Bare Truck Skid *all TIG welded aluminum by professional fabricators *full frame design for additional support and security (no formed panels or sheet metal) *full frame fork pockets for added support and safety during loading and unloading  *full frame shelves are self supporting which results in no flex/bounce while not relying on the truck bedside for support *narrower shelves are well within NTSB vehicle width guidelines while fitting all popular hose reel manufacturers *base is 48" wide, shelf height is 23" from bed floor to underside of shelf *10 year limited warranty

Read more less

Gas Powered Soft Wash & Pressure Washing Truck Skid. Compact footprint 48"x60" will fit short beds and allow for aftermarket ladder rack.Pressure washer: 5.7 gpm, 3000 psi gear drive with electric start Honda iGX390, setup to bypass to water tank.Soft Wash Pump: Gas powered Comet P40 or AR45 11.5 gpm, 290 psi, pull start engine.Hose reels: (3) matching aluminum frame, stainless steel internals 12" manual Hose: 200'x5/8" soft wash hose, 200'x5/8" water supply, 200'x3/8" HP hose non marking greyTanks: 100 gallon water capacity, 55 gallon SH, (2) 7 gallon soap tanksProportioning/metering system: Hydro-Mixer XL with dual soap valves, HD cover and manual flush valveSkid: 48"x60" with dual shelfs, fully welded HD aluminumMisc: soft wash gun, wand & JROD w/nozzles, HP gun, wand and 4 nozzles, SS quick connects on soft wash system, strainers/filters on all supply lines, SH resistant filter w/titanium clamp, float shutoff in water tank*12 volt deep cycle battery NOT included*-systems may vary due to availability of specific components. Approximate 2 week build time Add ladder rack and surface cleaner tray in options.

Read more less

Compact footprint only 40"x48" will fit short beds like the S10, Jeep Truck, etc. and allow for aftermarket ladder rack. Pressure washer:  5.7 gpm, 3000 psi gear drive with electric start Honda GX390, setup to bypass to water tank. Soft Wash Pump:  Remco 7 GPM Fatboy on-demand with fuse protection and HD on/off switch Hose reels:  (3) matching aluminum frame, stainless steel internals 12" choose electric or manual Hose:  200'x1/2" soft wash hose, 200'x5/8" water supply, 200'x3/8" HP hose non marking grey Tanks:  55 gallon water, 55 gallon SH, 7 gallon soap tank Proportioning/metering system:  Hydro-Mixer V4 with single soap valve and manual flush valve Skid:  42"x48" with single shelf curb side, fully welded HD aluminum Misc:  soft wash gun, wand & JROD w/nozzles, HP gun, wand and 4 nozzles, SS quick connects on soft wash system, strainers/filters on all supply lines, SH resistant filter w/titanium clamp, float shutoff in water tank *12 volt deep cycle battery NOT included* -systems may vary due to availability of specific components -approx 2 week build time

Read more less

Manufacturer/Model of certain parts may vary, for example...hose reel, hose color, spray wand type...We can guarantee all components and systems will meet our high quality standard and craftsmanship.      Pump:  Comet P40 or AR45 w/Honda engine Tanks:  (1) 55 gallon water tank, (1) 55 gallon chemical tank, (1) 7 gallon soap tank or (1) 100 gallon water tank, (1) 55 gallon chem tank, (2) 7 gallon soap tanks Hose reels:  (1) HD Summit, Titan or Kings reel for chemical spray hose, (1) HD Summit, Titan or Kings reel for water tank fill hose (hose reels are aluminum frames with stainless steel internals and swivel) Hose:  200' x 5/8" chemical resistant spray hose, 200' water tank fill hose with garden hose fittings Proportioning:  Hydro-Mixer XL w/bypass to pump, 3 metering valve-water, bleach, soap.   Pump Skid:  HD aluminum base plate Main Skid:  HD aluminum Misc Items:  Chemical resistant poly trigger, 18" sch 80 PVC wand, J ROD w/4 nozzles 0, 15, 25 and 40 degree Misc Parts:  Float shutoff in water tank, inlet strainer on water tank, all fittings PVC, poly or stainless steel Dimensions:  55 gallon tanks approx 40"x48"x48"H, 100 gallon water w/2 soap tanks approx. 48"Wx60"Lx48"H Options: Upgrade with Remote Rinse Module to save walking back to your rig to switch SH to water and shutoff surfactant.  Huge time saver! Upgrade to electric reels. **each system is custom made and may vary slightly**   Current lead time approx. 2 weeks.

Read more less

Manufacturer/Model of certain parts may vary, for example...hose reel, hose color, spray wand type...We can guarantee all components and systems will meet our high quality standard and craftsmanship.        Pump:  7.0 gpm Remco Fatboy on demand with inline fuse/circuit breaker, HD pressure switch Tanks:  (1) 55 gallon water tank, (1) 55 gallon chemical tank, (1) 7 gallon soap tank or 100 gallon water, 55 g. chemical and (2)-7 g. soap tanks Hose reels:  (1) HD stainless steel reel for chemical spray hose, (1) HD stainless steel reel for water tank fill hose Hose:  200'x1/2" chemical resistant spray hose, 100' water tank fill hose with garden hose fittings Proportioning:  Hydro-Mixer V4, 3 metering valve-water, bleach, soap.  Mounted to HD aluminum plate. Electrical:  HD wiring and on/off switch, on board weatherproof NOCO 10 amp charger, battery box included (battery supplied by customer) Skid:  HD aluminum Misc Items:  Chemical resistant poly trigger, 18" sch 80 PVC wand, J ROD w/4 nozzles 0, 15, 25 and 40 degree Misc Parts:  Float shutoff in water tank, inlet strainer on water tank, all fittings PVC, poly or stainless steel Dimensions:  55 gallon water tank 40"x48"x48"H, 100 gallon water tank 48"x60"x48"H **each system is built to order and may vary slightly   Current lead time approx. 2 weeks.

Read more less

Compact footprint 48"x60" will fit short beds and allow for aftermarket ladder rack. Pressure washer:  5.7 gpm, 3000 psi gear drive with electric start Honda iGX390, setup to bypass to water tank. Soft Wash Pump:  Remco 7 GPM Fatboy on-demand with fuse protection and HD on/off switch Hose reels:  (3) matching aluminum frame, stainless steel internals 12" manual Hose:  200'x1/2" soft wash hose, 200'x5/8" water supply, 200'x3/8" HP hose non marking grey Tanks:  100 gallon water capacity, 55 gallon SH, (2) 7 gallon soap tanks Proportioning/metering system:  Hydro-Mixer V4 with dual soap valves, HD cover and manual flush valve Skid:  48"x60" with single shelf curb side, fully welded HD aluminum Misc:  soft wash gun, wand & JROD w/nozzles, HP gun, wand and 4 nozzles, SS quick connects on soft wash system, strainers/filters on all supply lines, SH resistant filter w/titanium clamp, float shutoff in water tank *12 volt deep cycle battery NOT included* -systems may vary due to availability of specific components -select shipping or local pick up in options -approx 2 week build time

Read more less