Injectors
General Pump High Draw Fixed Dual Port Chemical Injector
Dual Port Fixed Chemical Injector Body only. Up to a 20% injection draw rate/ Made in the USA, A cost effective solution to your chemical application needs. Features: Up to a 20% injection draw rate Available with both fixed and adjustable barbs Made in the USA A cost effective solution to your chemical application needs choose your size
$29.00
Gently Wash Products X-Jet M5 Variable Spray Nozzle
X-Jet M5 Variable Spray Nozzle THIS IS A MUST HAVE FOR EVERY RIG! It can be used daily or as a reliable back up for when dedicated soft pumps pumps go down. CUT LABOR TIME. Switch from Soap to Rinse, or Adjust Spray Pattern with a simple twist. ADJUST SPRAY PATTERN from 0 to 60 degrees with the twist of a nozzle...No more switching tips. INCREASE EQUIPMENT LONGEVITY. External Injection System adds chemical at the end of the line. NO MORE MIXING CHEMICALS. Proportioners automatically draw chemicals at the desired ratio. STAY OFF LADDERS. Sprays up to 40 feet or more, depending upon your pressure washer. Includes: 15 Feet Clear Vinyl Tubing X-Jet Long Range Nozzle Quick Connect Plug On X-Jet Inlet Hose Barb for Chemical Injection Hose Spray Nozzle Orifice with Internal Low-Pressure Adapter Low-Pressure Soap Nozzle 14 Detergent Proportioners Shut Off Valve Filter Screen with Hose Barb
$172.00
PowerStream VDST (VARIABLE DOWNSTREAM) Control Panel Upgrade
Control Panel: VDST Bleach Valve: 1/2 inch Metering Valve Soap Valve: (3) 3/8 inch Metering Valve Manifold: 4 port
$1,499.00
Gently Wash Products Downstream Injector Bypass Kit
Downstream Injector Bypass Kit Use this kit to bypass your injector for higher flow. The Downstream Injector Bypass Kit allows you to turn a ball valve at the head of your pump to bypass your soap injector. This allows it to remain in your line while you rinse. Assembly Required This Kit Includes: (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" MPT (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" FPT (1) 3/8" DN10 Ball Valve (1) 4500 PSI 3/8" x 2' Whip Line ** GP High Draw Down Stream Injector Kit and all stainless quick connects are not included. We sell these products also but they will need to be added to your cart separately.
$137.00
Gently Wash Products Stainless Steel General Pump Fixed High Draw Injector
Stainless Steel General Pump Fixed High Draw Injector FIXED HIGH DRAW • Up to 20%draw • 5,000 PSI maximum • 190°F. maximum • 3/8" MPT inlet/outlet
$87.00
Gently Wash Products Down Stream Injector Kit With General Pump, Fixed High Draw Injector
Down Stream Injector Kit - Fixed High Draw 5ft suction hose with filter included Quick connects included Up to 20%draw 5,000 PSI maximum • 190°F. maximum 3/8" MPT inlet/outlet CHOOSE YOUR SIZE
$62.00
Gently Wash Products GP Brass 20% FIXED HIGH DRAW Down Stream Injector
Brass 20% FIXED HIGH DRAW Down Stream Injector FIXED HIGH DRAW • Up to 20%draw • 5,000 PSI maximum • 190°F. maximum • 3/8" MPT inlet/outlet CHOOSE YOUR SIZE
$27.00
Gently Wash Products Check Valve Adapter Kit For GP, High Draw Down Stream Injectors - Stainless Steel
Check Valve Adapter Kit For GP, High Draw Down Stream Injectors - Stainless Steel INCREASES CHEMICAL DRAW AND ALLOWS INJECTORS TO LAST MUCH LONGER! Stop over paying for these adapters! The threaded adapter piece we sell in this kit comes directly from General Pump and is made specifically for their Stainless OR Brass, high draw, down stream injectors. Simply remove the barb from the bottom of your injector, take out the ball and spring, then thread this into the bottom of your injector for a higher chemical draw ratio and to get WAY more life out of your injectors.
$57.00
