CRX 225cc Engine with Electric Start  9amp rectifier.   FEATURES Industrial tough mufflers and shields designed for improved sound quality and lower sound level Commercial-style dual element air filtration system helps maintain optimal power on dusty work sites Choke and fuel shut-off valve with integral fuel filter housing closely located for convenience and easy maintenance Cast iron cylinder decreases friction between mating parts as well as which helps keep the engine cool during extreme applications ​Heavy-duty steel, powder-coated fuel tank Precision-machined, forged iron crankshaft with heavy-duty steel ball bearings designed for low vibration and toughness required for the most extreme duty cycles  

Read more less

CRX420CC Engine with 1in Shaft Pull Start   Specs: Engine Type Air-Cooled, Single Cylinder, OHV Bore x Stroke 3.54" x 2.60" (90 x 66 mm) Displacement 25.63 cu in (420cc) Compression Ratio 8.3:1 Net Power 9.0 kW @ 3600 rpm Net Torque 27 Nm @ 2800 PTO Shaft Rotation Counterclockwise Ignition System Transistor Magneto Adjustable Throttle Exhaust Emissions 50 State PTO Shaft Dimensions 1" (25.4 mm) PTO Flange SAE J609 Flange B Engine Dry Weight 67 lbs Dimensions 17.25” x 16” x 17.9” Warranty 3yr Commercial   FEATURES: Industrial tough mufflers and shields designed for improved sound quality and lower sound level Commercial-style dual element air filtration system helps maintain optimal power on dusty work sites Choke and fuel shut-off valve with integral fuel filter housing closely located for convenience and easy maintenance Cast iron cylinder decreases friction between mating parts as well as which helps keep the engine cool during extreme applications ​Heavy-duty steel, powder-coated fuel tank Precision-machined, forged iron crankshaft with heavy-duty steel ball bearings designed for low vibration and toughness required for the most extreme duty cycles Low oil auto-shutdown sensor prevents damage to the engine when oil volume is low Heavy-duty steel blower housing designed to protect vital components from impact under the toughest conditions

Read more less

CRX Engine Oil Filter for CRX680 and CRX750 V-Twin Engines  

Read more less

CRX1000 This CRX  1000 is the premier V-Twin engine from CRX, packed with powerful and reliable components that provide the power you need for those tough commercial/industrial applications. Featuring full pressure lubrication, oil cooler and filter, heavy-duty muffler, cyclonic air filtration system and a 20A rectifier.   Displacement 60.9 cu in (999cc) Net Power 24.0 kW @ 3600 rpm Net Torque 71 Nm @ 2800 rpm Engine Dry Weight 135 lbs Dimensions 22.5" x 19.5" x 20.5" Warranty 3yr Commercial   FEATURES: Industrial tough mufflers and shields designed for improved sound quality and lower sound level Commercial-style cyclonic element air filtration system helps maintain optimal power on dusty work sites Cast iron cylinders decrease friction between mating parts as well as which helps keep the engine cool during extreme applications Precision-machined, forged iron crankshaft designed for low vibration and toughness required for the most extreme duty cycles Low oil auto-shutdown sensor prevents damage to the engine when oil volume is low Oil filter and external oil cooler extends the life of the oil and prevents premature wear and tear on critical mechanical parts

Read more less

Engine Only  CRX420 The largest of the single-cylinder line from CRX, the CRX  420 engine provides maximum performance every time you need it. Featuring all the bells & whistles of our single-cylinder engines, this powerful model handles the toughest of outdoor tasks.   Net Power 9.0 kW @ 3600 rpm Net Torque 27 Nm @ 2800 rpm Dry Weight 67 lbs Dimensions 17.25" x 16" x 17.9" Warranty 3yr Commercial   FEATURES Industrial tough mufflers and shields designed for improved sound quality and lower sound level Commercial-style dual element air filtration system helps maintain optimal power on dusty work sites Choke and fuel shut-off valve with integral fuel filter housing closely located for convenience and easy maintenance Cast iron cylinder decreases friction between mating parts as well as which helps keep the engine cool during extreme applications ​Heavy-duty steel, powder-coated fuel tank Precision-machined, forged iron crankshaft with heavy-duty steel ball bearings designed for low vibration and toughness required for the most extreme duty cycles Low oil auto-shutdown sensor prevents damage to the engine when oil volume is low Heavy-duty steel blower housing designed to protect vital components from impact under the toughest conditions

Read more less

The CRX  750 engine provides the power you need for those tough commercial/industrial applications. Like all of the V-Twin engines from CRX, this model features full pressure lubrication, oil cooler and filter, heavy-duty muffler, advanced air filtration system and a 20A alternator.   Net Power 16.0 kW @ 3600 rpm Net Torque 47 Nm @ 3000 rpm   Weight 109 lbs Dimensions 20" x 21" x 18.5" Warranty 3yr Commercial   FEATURES: Industrial tough mufflers and shields designed for improved sound quality and lower sound level Commercial-style advanced element air filtration system helps maintain optimal power on dusty work sites Cast iron cylinders decrease friction between mating parts as well as which helps keep the engine cool during extreme applications Precision-machined, forged iron crankshaft designed for low vibration and toughness required for the most extreme duty cycles Low oil auto-shutdown sensor prevents damage to the engine when oil volume is low Oil filter and external oil cooler extends the life of the oil and prevents premature wear and tear on critical mechanical parts

Read more less

Two 100gal THICK Slim water tanks with aluminum straps connected 55gal bleach tank with aluminum strap Two 7gal soap tanks with aluminum straps connected 5.5gpm belt driven pressure washer with Honda engine and pull start 7gpm 100PSI Delevan soft wash pump with on/off switch mounted to a 30” stand with 4 port Clear View metering manifold mounted on other side Two aluminum 12” Rugged Reels stacked for 200’ of 3/8” soft cover, non marking pressure and 200’ of 1/2” blue 300psi soft wash hose  One extra 12” Rugged Reel for garden hose (customer will rover garden hose) Everything BUT the two 100 gal tanks will be mounted neatly on a 41x48” aluminum skid Call or text me if you have any questions or concerns   

Read more less

Delavan 3 GPM 60 PSI Roof Rejuvenation Pump Choose 12v (most common) Or 115V plug in version  115V version is custom manufactured for us by order and are often on back order since it’s an uncommon configuration for this pump.  No Warranty On Pumps 

Read more less

THIS IS THE 12 VOLT SOFT WASHING PUMP USED BY THE PROS IN THE EXTERIOR CLEANING INDUSTRY! THIS PUMP   IS DESIGNED TO HANDLE HARSH CHEMICALS AND DAILY USE. This is the most robust 12v soft washing pump in the industry! Delavan PowerFLO™ 5.0 GPM 60 PSI Diaphragm Pump with 1/2” Threaded Ports. Demand Switch – Operates only when liquid flow is required.    Features:• Certified to NSF/ANSI Standard 61 & 372• Made in the USA• 100% Factory tested• 2 Year warranty from date of purchase Motor:• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated• Leads: 14 AWG, 6” long with 2-pin connector • Amps: 16.0 Max• Duty Cycle: See Heat Rise graph Materials of Construction:• Motor Shell: Coated Steel• Housing: Polypropylene • Valves: Viton• Diaphragm: Santoprene• Fasteners: Stainless Steel Pump:• Demand Switch – Operates only when liquid flow is required• Type: 5-chamber positive displacement• Capable of being run dry• Excellent self-priming capability • Liquid Temperature: 140° F Max.• Priming Capabilities: 14’• Max. Flow: 5.0 GPM• Pressure Shut-Off: 60 PSI • Inlet/Outlet Ports: 1/2” threaded  ** WE DO NOT WARRANTY THESE PUMPS ** REPLACEMENT PUMP HEAD ASSEMBLIES CAN BE PURCHASED FROM US. FLUSH THIS PUMP IMMEDIATELY AFTER EVERY USE AND IT COULD LAST AN ENTIRE SEASON. LET BLEACH SIT IN IT EVEN ONCE WITHOUT IMMEDIATELY FLUSHING IT AFTER A JOB, AND YOU WILL NEED TO REPLACE THE PUMP HEAD. DO NOT RUN THIS PUMP ON A LOW VOLTAGE OR IT WILL BURN UP THR MOTOR AND/OR PRESSURE SWITCH. MAKE SURE TO PLUMB PROPERLY AND USE THE CORRECT TIPS. 

Read more less

THIS IS THE 12 VOLT SOFT WASHING PUMP USED BY THE PROS IN THE EXTERIOR CLEANING INDUSTRY! THE FB3 IS DESIGNED TO HANDLE HARSH CHEMICALS AND DAILY USE. The Delavan 7970-101Y-SB PowerFLO Electric Diaphragm Pump (Automatic Demand) has a 12VDC motor with three chambers. This positive displacement unit features a bypass mode, is capable of being run dry, and is self-priming. The pump polypropylene construction includes Viton valves, stainless steel fasteners, and Santoprene diaphragms, and the pressure demand switch works only when liquid flow is necessary for a balanced flow. Features:   Automatic Demand Self-priming up to 14 vertical feet Can run dry without damage Built-in check valve Max flow: 7 gpm Max pressure: 100 psi Voltage: 12 VDC Component material: Viton® valves, Santoprene® diaphragm Port size: 1/2” threaded  Max fluid temperature: 140°F Weight: 8 lbs   * WE DO NOT WARRANTY THESE PUMPS ** REPLACEMENT PUMP HEAD ASSEMBLIES CAN BE PURCHASED FROM US. FLUSH THIS PUMP IMMEDIATELY AFTER EVERY USE AND IT COULD LAST AN ENTIRE SEASON. LET BLEACH SIT IN IT EVEN ONCE WITHOUT IMMEDIATELY FLUSHING IT AFTER A JOB, AND YOU WILL NEED TO REPLACE THE PUMP HEAD. DO NOT RUN THIS PUMP ON A LOW VOLTAGE OR IT WILL BURN UP THR MOTOR AND/OR PRESSURE SWITCH. MAKE SURE TO PLUMB PROPERLY AND USE THE CORRECT TIPS. 

Read more less

** FINANCING & LEASING AVAILABLE ** DIY Pressure Washing Rig Kit   This Kit Includes:  8GPM - 3500PSI GX690 Belt Drive - Pressure Pro • Plumbing Kit For Pressure Washing Machine • Hudson Float Valve Kit For Water Tank • 20ft of 3/4” Poly Braid Hose from Reel to Hudson Valve • Down Stream Injector Kit • Down Stream Injector Bypass Kit • 6ft Jumper Hose 3/8” 2 Wire • 100ft 3/4” Water Supply Hose • 2  100ft Sections Of 3/8” Single Wire High Pressure Hose • 1  50ft Section Of 3/8” Single Wire High Pressure Hose • Relax Action Trigger Gun • Mosmatic Swivel & Ball Valve Combo • Matrix Nozzle Holder With Sharp Shooter Tip & M5DS Nozzle *** OPTIONAL GROUND FORCE SURFACE CLEANER** *** OPTIONAL 18” Aluminum Rugged Reel or Titan Hose Reels With Stack Kit **   ** OUR KITS DO NOT COME WITH ASSEMBLY INSTRUCTIONS. IF YOU ARE NOT COMFORTABLE PLUMBING THESE KITS, PLEASE DO NOT PURCHASE THEM UNLESS YOU HAVE A SHOP THAT CAN DO IT FOR YOU. WE CAN NOT POSSIBLY TAKE THE TIME TO WALK EVERYONE THROUGH SIMPLE PLUMBING. **    

Read more less

** FINANCING & LEASING AVAILABLE ** DIY Pressure Washing Rig Kit With Bandit Honda GX390 Belt Driven 5.5 GPM - 3000 PSI Comet Pump SAVE THOUSANDS BY ASSEMBLING YOUR OWN PRESSURE WASHING SET UP.   This Kit Includes: • Bandit Honda GX390 Belt Driven 5.5 GPM - 3000 PSI Comet Pump • Plumbing Kit For Pressure Washing Machine • Hudson Float Valve Kit For Water Tank • 20ft of 3/4” poly braid hose for reel to Hudson valve  • Down Stream Injector Kit • Sharp Shooter Tip & M5DS Nozzle Combo • DN10 Ball Valve & Mosmatic Swivel Combo  • Suttner Easy Pull Trigger Gun  • 5 color coded nozzles  • 6ft Jumper Hose 3/8” 2 Wire • 250’ Of 3/8” Single Wire High Pressure Hose • Trigger Gun & Wand    **OPTIONAL SURFACE CLEANER ** Choose GP Hammerhead 18” or Whisper Wash Ultra Clean 16” *** OPTIONAL HOSE REELS ** Choose between two 18” Aluminum Titan or Rugged Reels With Super Swivels, Reducers, & Quick Connects   *** OPTIONAL ELECTRIC START **  ** OUR KITS DO NOT COME WITH ASSEMBLY INSTRUCTIONS. IF YOU ARE NOT COMFORTABLE PLUMBING THESE KITS, PLEASE DO NOT PURCHASE THEM UNLESS YOU HAVE A SHOP THAT CAN DO IT FOR YOU. WE CAN NOT POSSIBLY TAKE THE TIME TO WALK EVERYONE THROUGH SIMPLE PLUMBING. **

Read more less

** FINANCING & LEASING AVAILABLE ** DIY Pressure Washing Rig Kit   This Kit Includes:  • GX 690 Honda Electric Start 8 GPM- 3500 PSI High Output Hot Water Super-Skid • Plumbing Kit For Pressure Washing Machine • Hudson Float Valve Kit For Water Tank • 20ft of 3/4” Poly Braid Hose from Reel to Hudson Valve • Down Stream Injector Kit • Down Stream Injector Bypass Kit • 6ft Jumper Hose 3/8” 2 Wire • 100ft 3/4” Water Supply Hose • 2  100ft Sections Of 3/8” Single Wire High Pressure Hose • 1  50ft Section Of 3/8” Single Wire High Pressure Hose • Relax Action Trigger Gun • Mosmatic Swivel & Ball Valve Combo • Matrix Nozzle Holder With Sharp Shooter Tip & M5DS Nozzle *** OPTIONAL GROUND FORCE SURFACE CLEANER** *** OPTIONAL 18” Aluminum Rugged Reel or Titan Hose Reels With Stack Kit **   ** OUR KITS DO NOT COME WITH ASSEMBLY INSTRUCTIONS. IF YOU ARE NOT COMFORTABLE PLUMBING THESE KITS, PLEASE DO NOT PURCHASE THEM UNLESS YOU HAVE A SHOP THAT CAN DO IT FOR YOU. WE CAN NOT POSSIBLY TAKE THE TIME TO WALK EVERYONE THROUGH SIMPLE PLUMBING. **    

Read more less

This robust soft washing system kit consists of the highest quality components with no shortcuts taken.   The Gas Powered Soft Wash System with Premium AR45 Diaphragm Pump. These systems are often used for roof cleaning, residential & commercial soft washing and high volume rinse applications.   300 PSI 10 GPM Honda GX160  High Volume AR Diaphragm Pump Gear Driven Bolt-On Regulator Pressure Gauge Heavy Duty Aluminum Skid Frame   Specifications: Max GPM: 11.4 Max Pressure: 290 PSI Max RMP: 550 Max Fluid Temperature: 140 Deg F 35 mm (1-1/4″) Suction1″ Outlet 3/4″ Bypass AR45 plumbing kit 10ft 1.25” Suction Hose From Metering Manifold To Pump 10FT 300psi 3/4” Hose (pump to reel) 3/4 GHT Male x 3/4 NPT Male 3/4 GHT Female x 1/2 NPT Female 25ft 300PSI 3/4” Polybraid Bypass Hose 20 ft of 1” Suction Hose From Tanks To Metering Manifold 2 x 1″ Uni-seals For Water & Bleach Tank 3 x 1” Slotted PVC Strainers For Water, Bleach, & Flush/Auxiliary Tank Filters All hose clamps needed 10ft 1/4″ Hose For Soap  1/4” soap filter (2 if you purchase extra soap valve) CLEAR VIEW CHEMICAL METERING MANIFOLD WITH CHEMICAL RESISTANT VALVES & FLUSH/AUXILIARY VALVE  ClearView Series Hydro-Mixer XL for Gas Powered & 10+ GPM Pumps • Comes standard with 4 port clear view manifold (1”-1/2”-1”-1/2”) with a 1” through hole and end ports. The second 1/2” soap port is plugged with a 1/2” plug unless you add the second soap valve option. The clear material enables confirmation of product flow and helps with troubleshooting and locating leaks. •This kit comes with Hayward Metering Valves that are made of completely chemical resistant materials, seats and seals. It comes standard with Two 1” metering valves and a 1/2” soap metering valve.  • This soft washing system comes standard with a chemical resistant banjo 3-way valve with heavy duty stainless mounting pieces, ready to be bolted down. This valve is used for flushing your system after each use or for spraying chemicals other than bleach. This can also be used to transfer bleach onto your rig.    *** OPTIONAL ELECTRIC START **   *** OPTIONAL ADDITIONAL 1/2” SOAP VALVE **   *** OPTIONAL 18” ALUMINUM RUGGED REEL OR TITAN HOSE REELS, 200ft of 5/8” SOFT JET SOFT WASH HOSE, & TRIGGER GUNF ASSEMBLY   ** OUR KITS DO NOT COME WITH ASSEMBLY INSTRUCTIONS. IF YOU ARE NOT COMFORTABLE PLUMBING THESE KITS, PLEASE DO NOT PURCHASE THEM UNLESS YOU HAVE A SHOP THAT CAN DO IT FOR YOU. WE CAN NOT POSSIBLY TAKE THE TIME TO WALK EVERYONE THROUGH SIMPLE PLUMBING. **

Read more less

This robust soft washing system kit consists of the highest quality components with no shortcuts taken.   Comet P-40 Softwash System Skid Max flow: 11 gpm Max pressure: 300 psi Max rpm: 550 Pump shaft rotation: CW and CCW Max fluid temperature: 140°F 1in Supply 3/4in Discharge 1/2in Bypass  From Comet the newest soft wash pump on the market coupled to a Honda GX160 engine. The latest in innovation for the soft wash industry is here! Comet has designed a higher flow version of their poly series pumps. Enjoy flow rates up to 11 gpm and pressures up to 300 psi and a longer pump life due to upgraded chemical resistant components.   P40 plumbing kit 10ft 1″ Suction Hose From Metering Manifold To Pump 10FT 300psi 1/2” Hose (pump to reel) 3/4 GHT Male x 3/4 NPT Male 3/4 GHT Female x 1/2 NPT Female 25ft 300PSI 1/2” Polybraid Bypass Hose 20 ft of 3/4” Suction Hose From Tanks To Metering Manifold 2 x 1″ Uni-seals For Water & Bleach Tank 3 x 1” Slotted PVC Strainers For Water, Bleach, & Flush/Auxiliary Tank Filters All hose clamps needed 10ft 1/4″ Hose For Soap  1/4” soap filter (2 if you purchase extra soap valve) CLEAR VIEW CHEMICAL METERING MANIFOLD WITH CHEMICAL RESISTANT VALVES & FLUSH/AUXILIARY VALVE  ClearView Series Hydro-Mixer XL for Gas Powered & 10+ GPM Pumps • Comes standard with 4 port clear view manifold (1”-1/2”-1”-1/2”) with a 1” through hole and end ports. The second 1/2” soap port is plugged with a 1/2” plug unless you add the second soap valve option. The clear material enables confirmation of product flow and helps with troubleshooting and locating leaks. •This kit comes with Hayward Metering Valves that are made of completely chemical resistant materials, seats and seals. It comes standard with Two 1” metering valves and a 1/2” soap metering valve.  • This soft washing system comes standard with a chemical resistant banjo 3-way valve with heavy duty stainless mounting pieces, ready to be bolted down. This valve is used for flushing your system after each use or for spraying chemicals other than bleach. This can also be used to transfer bleach onto your rig.    *** OPTIONAL ELECTRIC START ** ** OPTIONAL ADDITIONAL 1/2” SOAP VALVE **   *** OPTIONAL 18” ALUMINUM RUGGED REEL OR TITAN HOSE REELS, 200ft of 5/8” SOFT JET SOFT WASH HOSE, & TRIGGER GUNF ASSEMBLY   ** OUR KITS DO NOT COME WITH ASSEMBLY INSTRUCTIONS. IF YOU ARE NOT COMFORTABLE PLUMBING THESE KITS, PLEASE DO NOT PURCHASE THEM UNLESS YOU HAVE A SHOP THAT CAN DO IT FOR YOU. WE CAN NOT POSSIBLY TAKE THE TIME TO WALK EVERYONE THROUGH SIMPLE PLUMBING. **

Read more less

This bleach rated chemical metering valve is great for 12 volt pumps, booster pumps, medium flow air diaphragm pumps. DOS/SM Series Metering Valve Chemical resistant materials, seats and seals FNPT x FNPT threaded ends Available in 1/2", 3/4" and 1" sizes 180 degree handle turn

Read more less

Down Stream Injector Kit - Fixed High Draw     5ft suction hose with filter included  Quick connects included  Up to 20%draw  5,000 PSI maximum • 190°F. maximum 3/8" MPT inlet/outlet     CHOOSE YOUR SIZE

Read more less

Downstream Injector Bypass Kit    Use this kit to bypass your injector for higher flow. The Downstream Injector Bypass Kit allows you to turn a ball valve at the head of your pump to bypass your soap injector. This allows it to remain in your line while you rinse. Assembly Required   This Kit Includes:  (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" MPT  (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" FPT  (1) 3/8" DN10 Ball Valve  (1) 4500 PSI 3/8" x 2' Whip Line   ** GP High Draw Down Stream Injector Kit and all stainless quick connects are not included. We sell these products also but they will need to be added to your cart separately.  

Read more less

Downstream Injector Bypass Kit    Use this kit to bypass your injector for higher flow. The Downstream Injector Bypass Kit allows you to turn a ball valve at the head of your pump to bypass your soap injector. This allows it to remain in your line while you rinse. Assembly Required   This Kit Includes:  (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" MPT  (1) Steel Tee 3/8" FPT x 3/8" FPT x 3/8" FPT  (1) 3/8" DN10 Ball Valve  (1) 4500 PSI 3/8" x 2' Whip Line   ** GP High Draw Down Stream Injector Kit and all stainless quick connects are not included. We sell these products also but they will need to be added to your cart separately.  

Read more less

Downstream V3 ClearView Manifold *3 product selector for downstream injectors *Simple plug n play setup. Connect the outlet to your downstream injector *quickly change between 3 different products or blend multiple products together *Micro shut off valves with FKM seals allow for adjustment of flow (not full metering) *Built in check valves with titanium springs for bleach and chemical resistance *ClearView manifold to visually confirm product and location of air leaks *securely mounted to our 15.5" wide HD aluminum plate *Made in USA

Read more less

DS PRO comes assembled with a polypropylene block with 1/4" inlet ports, pvc check valves with stainless steel balls and viton™️ seals, and Asahi labcock metering valves. No more mixing soap into your chem tank. Separate and meter your soaps through a single downstream injector! Block is made from black polypropylene, etched label, and drilled and tapped by to 1/4”. Choose 2 or 3 ports    

Read more less

C&R dual tip holder. Add a sharp shooter and M5 twist nozzle to make this the perfect nozzle set for downstreaming. These tips are spaced properly for the larger accessories like the M5 twist nozzle.  High quality machined aluminum. 

Read more less

Dual Turbo Nozzle Combo   We believe the PA turbo nozzles are the most reliable rotary nozzles in the pressure washing industry and that’s why we sell them!  **LET US KNOW IF YOU AREN’T 100% SURE ON WHAT SIZE YOU NEED. HAPPY TO HELP!**  The increased cleaning action of the rotating spray nozzles is ideal for hard surface applications, such as concrete, pavers, graffiti removal or removing caked mud from heavy equipment. This dual turbo nozzle increases cleaning efficiency by covering twice as much surface.   • Strong brass structure • Shock resistant ceramic internal stabilization spring. • Oversized bearings for long life • Designed for higher pressures and more demanding applications  • Can be used in any position • 6 GPM minimum with two #3 nozzles • 16 GPM MAX with two #8 nozzles • 5100 PSI MAX • 212 degree F  MAX • Comes with a General Pump filter  • Comes with a 1/4” plug, ready to connect to a lance with a 1/4” socket   *** CHOOSE YOUR SIZE BUT REMEMBER TO DIVIDE YOUR GPM BY 2 SINCE THERE ARE TWO NOZZLES***    For example, an 8gpm machine cleans great with two #4 nozzles. REFER TO THE NOZZLE SIZE CHART TO PICK YOUR PERFECT SIZE TIPS. ** THIS COMES AS A KIT AND WILL NEED TO NE ASSEMBLED** Make sure to use thread tape & sealant on the fittings. 

Read more less

  **** PLEASE NOTE. The Pictures used are not of the current pump. Other than that, all other components will ne the same *** This is the most capable, compact spray system in the roof rejuvenation, agricultural and pest control industry. Suction Side  The 3 way Viton valve on the suction side gives the operator the option to draw from either the solution tank or their rinse line. Both the solution line and rinse line come with chemical resistant, slotted, poly filters. The solution line is 10ft long and the rinse line is 20ft long. Both are premium, 3/4” non collapsable suction hose. The solution line also comes equipped with a uniseal tank gasket to neatly secure the solution line and filter in your tank from the top side. Their are no metal fittings on the filters. Everything that goes into the tank is 100% chemical resistant poly. The rinse line can also be used to transfer chemicals from a bulk tank to a solution tank. If you select the metering manifold option for soft washing, the 3 way valve for flushing will be installed on the SH line of the metering manifold.  Pressure Side The bypass line is 10ft of 1/2” clear poly braid hose with a ball valve and cam lock system that connects to the top of the tank. The bypass line will circulate your chemical solution in a loop through the system while you are off the trigger and bypass any excess solution while you are on the trigger. This helps keep your batch mixed solution mixed throughout the application process.  Choose 3GPM or 5GPM 60 PSI Delevan Pump This system comes equipped with either a 3 GPM or 5GPM 60PSI pump powered by 12v or 115v.  These chemical rated Delevan pumps are pre-wired and neatly mounted to the aluminum box. 12v pumps are standard but we can have Delavan custom build AC versions of this pump. Sometimes this will extend the lead time if you choose the AC pump model.  COMES WITH AN EXTRA PUMP FOR BACK UP These electric pumps will fail over time (usually from low voltage or surges) but are pretty simple to replace. We send a back up pump with this system. *NO WARRANTIES ON PUMPS* HOSE REEL The Spray Pro 12V Application System comes with your choice of a full-frame 12” or 18” aluminum Rugged Reel with a stainless manifold. This reel is designed to hold up to daily use with corrosive chemicals.     APPLICATION HOSE  This professional sprayer system comes with either 200ft or 300ft of 1/2” Soft Jet Premium Chemical Resistant soft washing hose that is rated for 300 PSI. The 12” reel comes with 200ft and the 18” reel comes with 300ft. This robust application hose is UV resistant, non-marking, & lightweight. This hose meets RMA (Class B) oil resistance.  APPLICATION WAND  The wand consists of a ball valve, trigger gun, 18” wand and stainless J-rod with 4 stainless steel nozzles (0,15,25 and 40 degree 1/4 meg nozzles in #20 orifice. The zero degree nozzle is used to achieve the longest spray distance of approximately 40' while the 40 degree nozzle sprays the widest fan pattern for up close applications.  The application wand is able to be disconnected with a chemical resistant ball valve and camlock fitting and neatly mounted to the front of the Spray Pro 12V Application System. Being able to disconnect the wand allows for the operator to use our different wand set ups or even transfer chemicals to tanks and pump sprayers that are far from the spray system. NO SHORTCUTS ON COMPONENTS All fittings used on this professional grade spray application system including the hardware are either poly or stainless steel. We do not cut any corners on quality. This system is designed for daily, industrial use. Our system was designed by professionals to be used as a soft wash spray system, roof rejuvenation spray system, a pest control spray system or agricultural spray system but can also be used for many other solution spraying applications.    ASSEMBLY  The Electric Spray Pro Application System comes plumbed ready to use. All you need to supply is the tank and deep cycle marine batter if you choose the 12v option. You will need to install the provided bulkhead fitting to the top of your solution tank. 

Read more less

The Enchilada is a two in one soft washing and power washing skid that allows you to do a little bit of everything from one compact, highly capable, and premium system. 12" U-Frame Stingray™ Hose Reel (Soft Wash): 200 ft 1/2" Clear Braid Hose 12" U-Frame Stingray™ Hose Reel (Pressure Wash): 200 ft 3/8" Pressure Hose Bleach Tank: 50 Gallons Water Buffer Tank: 50 Gallons Soap Stinger Hose: 3/8 inch Reel Stand Lite w/ Extension: Lower Skid Unit: 42 inch Tank Straps: 3 inch Soap Metering Valve: 3/8 inch G.F. DN10 Bleach Metering Valve: 1/2 inch G.F. DN15 Soft Wash Pump: 5 GPM 12 volt 90 PSI Float Valve: 3/4 inch Hudson Power Washer: 5 GPM Belt Drive 3500 PSI Length: 45 inches Width: 58 inches Height: 49.5 inches Weight: 478 lbs

Read more less

F9 BARC Battery Acid Restoration Cleaner   Click Here for SDS Download Ideal for: Heavy rust stains Fertilizer stains Snow plow blade rust stains Battery acid stains Irrigation stains Much more Description Rust can come from a variety of sources, mainly from metals or fertilizers that contain iron. Most concrete rust does not travel more than 1/16” deep into the concrete. Orange Battery Acid is an orange flash acid “burn” that can travel down your driveway and into the street. Flash acid burn looks almost identical to rust in appearance, but it is very different. If your battery acid is white, unfortunately this can travel throughout the entire slab and there is no cleaner that can remove the white stain. F9 BARC is GUARANTEED to remove THE MOST concrete rust, fertilizer staining and orange battery stains than ANY OTHER product on the market! F9 works on CONCRETE, BRICKS, PAVERS, TILE, STONE, STUCCO, ASPHALT, VINYL, SIDING, SHINGLES, RUBBER, SIDEWALKS AND MORE! DO NOT USE ON GLASS Instructions To Clean Rust, Orange Battery Stains and Fertilizer Stains From Concrete: 1. Pre-Cleaning: Power wash concrete using a commercial grade pressure washer, degreaser and surface cleaner.  An alkaline concrete cleaner may be used. Rinse well.  Cleaning the concrete first will open up the pores of the concrete and allow F9 BARC rust remover to soak in deeper and remove more of the orange battery stain than just applying F9 BARC alone. 2. After initial pre-cleaning, let the concrete dry completely. 3. USING A 1:2 DILUTION RATIO (1 PART WATER TO 2 PARTS F9 BARC) apply F9 BARC through pump up sprayer liberally and evenly to the entire pad of concrete.  Do not “spot spray” on your first application. Use a circular overlapping spray motion. Spray from one side of the concrete pad to the other using a fine mist up to a uniform spray. High pressure low volume at 60-70 psi is recommended. Apply from control joint to control joint on the entire pad of concrete. Apply a bit more product on the areas with more staining. Apply as evenly and as thick as possible without letting F9 BARC run down the concrete. If F9 BARC does run down the concrete leave it alone. F9 BARC should begin to turn white and foam slightly. 4. Let concrete dry. Stains will disappear as concrete dries. 5. If spots remain follow directions in #3 again. If not, proceed to #7. It is better to go heavier on the first application and lighter on the second application. On the second application you may use less product on the areas with less staining and more product on the areas with stains remaining. It is acceptable to mist-spray on this application. 6. Let concrete dry. Stains will disappear as concrete dries. 7. A natural by-product of the reaction of this product and the concrete are light and dark mineral salts. Wet the concrete with water to reactivate the F9 cleaner. While wet, lightly broom the concrete to help F9 penetrate the concrete even deeper. Do not let concrete dry. Rinse LIGHTLY with a pressure washer to remove remaining surfactant. Do not use a surface cleaner here. Allow concrete to dry completely and evaluate results. Instructions To Clean Non-Cement Substrates: 1. Mist surface so it is damp but not wet. Using a minimum of 1:2 ratio (1 part water to 2 parts F9), mist product on surface. Rust stains should disappear. Repeat if necessary. Rinse with water after stain disappears. Do not use on glass. 2.  F9 BARC can be diluted with up to 3 parts water for tile, stone, vinyl and other not so porous surfaces.  Always do a test spot to confirm compatibility.   ◦Non Porous Substrates: Sealed Concrete, Concrete Coatings, Clay Pavers, Tile, Painted Metal, Aluminum (not polished or chrome), Stainless Steel, Interior Pools and surfaces that do not allow water to penetrate. Dilute F9 BARC 2:1 (two parts Water to 1 part F9.  This makes 3 gallons of F9 from 1 gallon of concentrate.  Spray a rate of 400-800’ per gallon. A light brushing with a soft or medium truck brush may be required.  Do not let F9 Dry and rinse immediately following disappearance of stain. ◦Semi Porous Substrates: Stucco, Plastic, Vinyl, Asphalt, Stone and others. Dilute F9 1:1 to 2:1.  Spray at a rate of 400-800’ per gallon.  Do not let product dry and rinse immediately following disappearance of stain. ◦Porous Substrates: Concrete, Bricks and Pavers.  Require a heavier concentration due to porosity and the need for deeper penetration.  Dilute F9 1:2 (1 part water to 2 parts F9).  Spray at a rate of 400-800’ per gallon.  This application requires F9 to DRY INTO the concrete and lock in.  Follow instructions listed on product and watch all F9 videos before application.  

Read more less

F9 EFFLO Calcium and Efflorescence Remover  Click Here for SDS Download Ideal for: Calcium carbonate Calcium Mineral stains Etch marks Efflorescence Copper stains Mud/red clay stains Much more! F9 Calcium and Efflorescence Remover is a user friendly, full 31.45% strength muriatic acid replacement. This product combines a buffered, pleasant smelling acid along with an excellent soaping capability to work better at lower concentrations. F9 Calcium and Efflorescence Remover gives the user the advantage of a full strength product while greatly reducing fuming and corrosion, thereby improving overall health and safety risk profile.   F9 Calcium and Efflorescence Remover Product Features: -Does not Burn Intact Skin -Up to 95% Less Fumes than Full Strength HCL Acid -Works Better than Full Strength Muriatic Acid with Less Harmful Effects -Quickly Removes Efflorescence, Calcium, Calcium Carbonate and -Hard Water Stains Uses: Concrete and Masonry: Use to clean efflorescence and calcium.  At stronger concentrations, use to etch concrete in preparation for painting or coatings.  At diluted ratios, use as a general cleaner.  Removes excess mortar from brick and mud stains. Application instructions: Always Add Acid to Water, NOT Water to Acid Pre-Cleaning: If necessary, power wash surface to be cleaned using a commercial grade pressure washer, degreaser and surface cleaner to remove oil and debris.  An alkaline concrete cleaner may be used.  Rinse well.  Cleaning the concrete first will remove loose dirt and debris, clearing the path for better cleaning. Dilution Ratios (Water to Product): For Concrete, Brick, Paver, Grout & Masonry Thick Calcium Stains and Concrete Prep for Coatings: 1:1 up to 4:1Medium Calcium Stains: 4:1 up to 8:1Light Calcium Stains: 8:1 to 12:1Powdery Efflorescence Cleaning 12:1General Cleaning 8:1 Cleaning Instructions: For Concrete, Brick, Paver, Grout & Masonry 1. Add 1 part F9 Efflorescence and Calcium Remover to proper ratio of water.  Always pour cold water into the bucket first, then add product.  Always test first to confirm compatibility and desired strength.  F9 EFFLO CAN ETCH MASONRY.  ALWAYS TEST FIRST! 2. Mist surface with water so it is damp, but not puddling. 3. Spray product on surface to be cleaned using a pump up sprayer, hand held sprayer or the F9 Hand Carry Electric Sprayer.  Surface should foam immediately.   Let dwell 20 seconds to 3 minutes.  Do not let product dry. 4. Scrub surface as necessary with a hard bristled brush or broom.  Let dwell  another 1-15 minutes.  Neutralize surface.  Power wash with fan tip or surface cleaner if needed.  Do not let product dry. 5. Analyze results, repeat application if needed and adjust dilution according to desired results. 6. Several mild individual applications are better than one overpowering dose.  Always pressure wash and flush the surface after application Coverage on Porous Surfaces:  One gallon of F9 Calcium and Efflorescence Remover covers 200-400′ of porous masonry and up to 1,200’ of sealed or non-porous masonry.   Application rates will vary depending on the amount of staining, porosity of the substrate and if the surface was sealed. Suitable Substrates:  F9 Efflorescence and Calcium Remover can be used on a variety of surfaces, including concrete, bricks, pavers, limestone, sandstone, riverstone, exposed aggregate, stucco, shingles, EIFS, glass, synthetic stone, anodized aluminum, unpolished marble and other surfaces. Unsuitable Substrates:  May not be suitable for polished or glazed surfaces.  Not for use on metallic or other synthetic coatings or films.  Do not use on acrylic and polycarbonate sheet glazing. Always perform a test to ensure compatibility. Always test a small area first to confirm compatibility.

Read more less

Female NPT Banjo Micro Valve  FKM Viton - Chemical Resistant  Choose between 1/4” 3/8” and 1/2”

Read more less

Filter - 1/4” Barb

Read more less

This tape is great for taping plastic over electrical hazards and stained doors during the soft washing process. This tape helps lock out moisture with edge locking technology. On a really wet or damp day, you will still need to use clear Lexel to seal this tape to the surface for a water tight edge. 

Read more less

Gear Drive 5.5GPM at 3000PSI CRX420 With Comet Pump   MGD-5530CC CRX420 w/ Comet Pump Gear Drive 5.5 GPM at 3000 PSI Commercial Pressure Washer. 3 Year Limited CRX Warranty Imcludes a Gun/ Wand Assembly, Tips, and a 50ft section of FIERCE JET Hose! Motor Oil : 10w30Pump Oil: 30wt Non-Detergent Footprint:30 x 22 x 18MGD-5530CC   Please message us for an approximate lead time  on shipping before placing your order. 

Read more less

Gear Drive 5.5GPM at 3000PSI CRX420 With General Pump Includes a Gun/ Wand Assembly, Tips, and a 50ft section of FIERCE JET Hose! Motor Oil : 10w30Pump Oil: 30wt Non-Detergent CRX420 Gear Drive 5.5GPM at 3000 PSI.General Pump3 Year Limited CRX Warranty Footprint:30 x 22 x 18MGD-5530CG   Please message us for an approximate lead time  on shipping before placing your order. 

Read more less

MGD-5530HC Honda GX390 w/ Comet Pump Gear Drive 5.5 GPM at 3000 PSI Commercial Pressure Washer. 3 Year Limited Honda Warranty Includes a Gun/ Wand Assembly, Tips, and a 50ft section of FIERCE JET Hose! Motor Oil : 10w30Pump Oil: 30wt Non-Detergent Footprint:30 x 22 x 18MGD-5530HG   Please message us for an approximate lead time  on shipping before placing your order.

Read more less

Gear Drive 5.5GPM at 3000PSI Honda GX390 With General Pump Honda GX390 Gear Drive 5.5GPM at 3000 PSI.TSS1021 General Pump 5.5GPM3 Year Limited Honda Warranty Includes a Gun/ Wand Assembly, Tips, and a 50ft section of FIERCE JET Hose! Motor Oil : 10w30Pump Oil: 30wt Non-Detergent Footprint:30 x 22 x 18MGD-5530HG   Please message us for an approximate lead time  on shipping before placing your order.

Read more less

GENERAL PUMP DHRA50300 3/8" X 300' 5000 PSI STEEL A-FRAME 12" PRESSURE WASHER HOSE REEL   This General Pump Steel A-Frame Hose Reel (DHRA50300) can hold up to 300' of 3/8" pressure hose and is rated up to 5000 PSI at 300°F. This reel features a direct hand crank rewind with a locking mechanism that allows you to set the desired hose length. It is built to last with a solid steel construction with a gray powder coat finish that resists rust and corrosion.  

Read more less

GENERAL PUMP DHRA50450 3/8" X 450' 5000 PSI STEEL A-FRAME 18" PRESSURE WASHER HOSE REEL     This General Pump Steel A-Frame Hose Reel (DHRA50450) can hold up to 450' of 3/8" pressure hose and is rated up to 5000 PSI at 300°F. This reel features a direct hand crank rewind with a locking mechanism that allows you to set the desired hose length. It is built to last with a solid steel construction with a gray powder coat finish that resists rust and corrosion.  

Read more less

Dual Port Fixed Chemical Injector Body only. Up to a 20% injection draw rate/ Made in the USA, A cost effective solution to your chemical application needs. Features: Up to a 20% injection draw rate Available with both fixed and adjustable barbs Made in the USA A cost effective solution to your chemical application needs choose your size 

Read more less

GENERAL PUMP HOSE REEL STACKING KIT FOR 12”-18” DHRA HOSE REELS    This General Pump Hose Reel Stacking Kit for DHRA Hose Reels (2100437) keeps your hose reel from touching the ground, in order to prevent damage to the reel and hose when not in use. This convenient, space-saving stacking kit fits DHRA50150, DHRA50300, and DHRA50450 hose reels (sold separately).  

Read more less

General Pump K-7 Unloader   **CHOOSE YOUR GPM**   This unloader has a flow-through design and should be mounted so that there is easy access to the adjusting bolt.    A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment.    A minimum of 5% bypass is required for proper operation.    The bypass hose needs to be rated for 300+ PSI to keep from blowing off or bursting. Securing the bypass hose is also recommended so it doesn’t move around when it goes into bypass. Features:   0-3500 PSI Stainless and brass internal parts. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Eliminates pressure peaks normally generated by conventionally designed unloaders. No external moving parts or springs. Maximum Temperature: 165 F. Dual gauge ports. Inlet Port: 3/8" FPT. Outlet Port: 3/8" MPT. Bypass Port: 3/8" MPT.      

Read more less

General Pump YG1635SR Washdown Gun 16 gpm 350 psi Stainless steel including pin Swivel included 1/2" FPT inlet swivel 195 degrees Adjustable spray pattern 0-60 degrees Works great with gas powered roof pumps

Read more less

Brass 20% FIXED HIGH DRAW Down Stream Injector    FIXED HIGH DRAW • Up to 20%draw • 5,000 PSI maximum • 190°F. maximum • 3/8" MPT inlet/outlet CHOOSE YOUR SIZE

Read more less

GP Hose Reel Swivel (Universal) 1/2" FPT x FPT   90 degree stainless steel swivel    Stainless Steel 90° 1/2" FPT x 1/2" FPT PSI: 5000 Max    

Read more less

Grime Wrecker is a concentrated degreaser that is effective at removing oil, grease, & soot stains as well as oxidation from many surfaces including gutters, siding, metal roofs, & more.  Directions: Prewet surface and surrounding areas prior to use, pay special attention to windows Dilute as needed and apply with a low pressure mist from a dedicated pump or a brush.  Always test the inconspicuous area. Do not use on polished aluminum. Stucco/Dryvit may change color, use with caution!  Do not allow the product to dry on the surface. Rinse thoroughly with water.   Dilution Suggestions: Start with these ratios and up the strength as needed Oxidation Removal: 24 oz per gallon of water Degreasing: 32 oz per gallon of water     DISCLAIMER Gently Wash Products LLC & Outdoor Cleaning Store make no warranties for this product and in no case shall be liable for any kind of damages resulting from the use or handling of this product. The terms of this disclaimer cannot be varied by any written or verbal statements at the point of sale or elsewhere.   CLICK HERE FOR PRODUCT SDS SHEET

Read more less

Gutter Cleaning Tool     Threaded Design,Made of premium material, it is with high toughesss, not easy to deform, you can use it for long time. Unique shaped hook to pull debris under gutter hangers and clean behind skylights and other roof structures. With the unique gutter cleaning tool, you can clean many more areas in your gutters while you move your ladder much less. It is suitable for gutters to clean up leaves or dirty in the skylight roof for villas, townhouses, ditch, sewers, where the hands cannot reach. Ergonomic gutter cleaning tool that attaches to most extension poles Allows you to hang this tool from the ladder rungs when you need your hands.    

Read more less

GX Series Red Recoil Starter Assembly for GX 340-390   Veloci's Aftermarket Replacement parts for the Honda GX series of small engines, have a proven track record for excellent quality and fitment since their introduction in 2008. We did our homework to provide you with a hand selected, premium, aftermarket part that is of OEM quality. These aftermarket engine parts fit the Honda GX Series, only.   When selecting your replacement engine part be sure to confirm that it is a GX (Contractor Series) and falls within the sizing of a 120-610.

Read more less

Hayward PROPORTIONAL Flow CONTROL BALL VALVES-These are the valves used in our Hydro-Mixer XL and XXL metering systems-Select size and water, SH or soap decal-valves come with female threaded ends

Read more less

Heavy Duty Outdoor Broom & Dust Pan 

Read more less

[ TRANSFER RATES ] Transfers up to 5.5 Gallons per Minute with Manual Piston-Action - Corrugated, Flexible Discharge Hose Length of 47.2-inch with built-in nozzle holder - Air Vent Cap can be tightened ( clockwise ) to create a siphon vacuum or loosen ( counter clockwise ) to stop or slow the flow [ RECOMMENDED ] Flows great with petroleum products, light oils, e15, e85 (remove after use), kerosene, diesel oils, toluene, deodorants, corrosives, chemical insecticides, soaps, detergents, mild acids, antifreeze, liquid waxes, thinner gasoline & drinking water (BPA-Free, Safe for Drinking Water) [ SEGMENTED TELESCOPIC TUBE ] 3PC Segmented Suction Tube length of about 34.4-inch, Fits 15-Gallon (50 Liters) and up to 55 Gallon (205 Liters) Drum Barrels - Suction end Outer Diameter: 0.75-inch - Complete with built-in & 2-inch NPS bung adapter for Drum Barrels with 2-inch Openings [ MANAUL POWERED ] No Electricity Required: Utilizes lever-action to transfer liquids by a simple grip and pump - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - Quickly Empty 55 Gallon Drum Barrels  

Read more less