ORANGE TRAFFIC CONES - Our collapsible traffic cones are made from high-grade materials. These street cones can withstand wear and tear and handle repeated expanding and collapsing.
$39.00
4 Port Clear Vision Soft Washing Chemical Manifold The clear material enable confirmation of product flow and helps with troubleshooting and locating leaks. Choose between (3/4", 1/2", 3/4", 1/2") with 3/4" through hole, 3/4" end ports OR (1", 1/2", 1", 1/2") with 1" through hole, 1" end ports Two top mounting holes allow for secure mounting to our plate or other surfaces. 5 year warranty ** OCS RECOMMENDS TEFLON TAPE OR WHITE PTFE THREAD SEALANT ON CLEARVIEW MANIFOLDS. DO NOT OVER TIGHTEN. THERE IS NO WARRANTY OR RETURNS ON CRACKED MANIFOLDS.**
$175.00 - $185.00
4 QC Nozzle Holder Plastic nozzle holder that will slide on most 1/4” lances or wand pipes
$17.00
This machine plumbing kit is designed to be a one stop option to plumb your machine to a tank on your truck or trailer build. AR Pump, General Pump, and Comet Pump kits. This kit includes: 20ft 3/8 Yellow Hose for Bypass 20ft 1in Tundra Crush Proof Hose (Water Inlet) 1in Banjo T-Strainer Filter 1in Poly Ball Valve 1in Banjo Bulkhead 1in Banjo Poly Fittings 1" x 1/2" MPT Brass Hose Barb 8ft 3/8 High Pressure Whip Line w/ Stainless Steel Quick Connect Fittings 3/8 Barb x 3/8 threaded brass fitting Stainless Steel Hose Clamps This kit is designed to plumb your AR, Comet, or General Pump pressure washer to a supply tank on your trailer or skid build.
$221.00
Gas Powered Soft Wash & Pressure Washing Truck Skid. Compact footprint 48"x60" will fit short beds and allow for aftermarket ladder rack.Pressure washer: 5.7 gpm, 3000 psi gear drive with electric start Honda iGX390, setup to bypass to water tank.Soft Wash Pump: Gas powered Comet P40 or AR45 11.5 gpm, 290 psi, pull start engine.Hose reels: (3) matching aluminum frame, stainless steel internals 12" manual Hose: 200'x5/8" soft wash hose, 200'x5/8" water supply, 200'x3/8" HP hose non marking greyTanks: 100 gallon water capacity, 55 gallon SH, (2) 7 gallon soap tanksProportioning/metering system: Hydro-Mixer XL with dual soap valves, HD cover and manual flush valveSkid: 48"x60" with dual shelfs, fully welded HD aluminumMisc: soft wash gun, wand & JROD w/nozzles, HP gun, wand and 4 nozzles, SS quick connects on soft wash system, strainers/filters on all supply lines, SH resistant filter w/titanium clamp, float shutoff in water tank*12 volt deep cycle battery NOT included*-systems may vary due to availability of specific components. Approximate 2 week build time Add ladder rack and surface cleaner tray in options.
$15,488.00 - $18,888.00
5 Pack of Quick Connect Nozzles For Pressure Washing Machines. These are the standard nozzles that come with most pressure washers. Use the nozzle chart to choose the correct size nozzle orifice for your pressure washing machine. Includes 0°, 15°, 25°, 40°and 65° ** AN UNDERSIZED ORIFICE WILL PRODUCE MORE PRESSURE AND LESS GPM AND AN OVERSIZED ORIFICE WILL PRODUCE LESS PRESSURE AND MORE GPM. WE HAVE GIVEN SUGGESTIONS ON WHAT ORIFICE SIZES CAN BE USED WITH DIFFERENT GPM MACHINES BUT WE STILL RECCOMEND PURCHASING AND TRYING TWO DIFFERENT SIZES AND PICKING YOUR FAVORITE. YOU’LL MOST LIKELY END UP FINDING AN APPLICATION FOR BOTH SIZE TIPS ANYWAY.
$37.00
5-Gallon Plastic Bucket & Pail Opener
$16.00
Annovi Riverberi AR Pump Gear Box Made Ready 5.5 Gallons Per Minute. Many people are looking for options to change their pump from a direct drive or a belt drive assembly to a gear box assembly. This Gear Box Assembly is designed for you to install an alternative pump option for a motor you already have. This also includes Predator Motor Builds. Our Gear Box Assembly is already put together for you to save time and confusion. Our team properly installs and packs the gear box assembly to ship direclty to you! *DONT FORGET TO GET A PUMP SUPPORT BRACKET*We highly recommend picking up a pump support bracket to mount on the bottom of your pump. This will help relieve the tension and weight that is on the Gear Box from supporting the Pump. The HEAVIER THE PUMP. The More this is NECESSARY to ensure your unit doesn't have any issues long term. Please choose the appropriate option for your motor specs:GMR AR 5.5GPM B18 - AR Pump 5.5 Gpm RG21.25 Pump and GP B18 Gear Box Assembly for 1" Shaft Motors - GX390, GX630, Predator Motors Please see the images on this listing for basic installation instructions. If you are still unable to confidently install this pump, please take it to a reputable service center. Unfortunately, we are too busy fulfilling orders to stop and teach equipment maintenance and installation. Warranty and Installation NOTICE! These Gear Box Assembly Kits have the parts needed to correctly install the Pump and Gear Box to your motor. We have solved most of the confusion when buying a Gear Box from other suppliers. We have installed the gear box and the pump already for you. All you have to do is properly install the Gearbox Assembly to the motor crank shaft. Please ensure you choose the right gear box for your application. Pumps and Gear Box have oil in them and are ready to use! We recommend using STP Gear Oil 80w90 for the Gear box. STP 30w non Detergent for the pump. Installation Warranty: There is no warranty on improper installation of the gear box assembly. If you do not feel confident to install this on your own motor, we highly recommend taking it to a reputable service center to install it for you. Proper installation on these gear box assemblies is the most important thing you can do. Please message us for an approximate lead time on shipping before placing your order.
$1,096.00$896.00
** CHOOSE WITH OR WITHOUT ALUMINUM STRAPS ** 55 Gallon Vertical Tank. 18 x 18 x 42 This tank has NO bulkheads cut in it. It is ready for chemical use. These are great tanks for pressure washing and soft washing
$394.00 - $994.00
Lexel clear sealant is great for getting the tape to seal better on a wet or really damp day. This allows you to have a water tight seal when taping plastic over electrical hazards and stained doors during the soft washing process.
$19.00
6-8gpm Pressure Washer Plumbing Kit for AR, General Pump, and Comet Pump This machine plumbing kit is designed to be a one stop option to plumb your machine to a tank on your truck or trailer build. AR Pump, General Pump, and Comet Pump kits. This kit includes:20ft 3/8 Yellow Hose for Bypass20ft 1in Tundra Crush Proof Hose (Water Inlet)1in Banjo T-Strainer Filter1in Poly Ball Valve1in Banjo Bulkhead1in Banjo Poly Fittings1" x 1/2" MPT Brass Hose Barb8ft 3/8 High Pressure Whip Line w/ Stainless Steel Quick Connect Fittings3/8 Barb x 3/8 threaded brass fittingStainless Steel Hose Clamps This kit is designed to plumb your AR, Comet, or General Pump pressure washer to a supply tank on your trailer or skid build.
$221.00
7 Gallon Soap Tank 7 gallon poly tank14x9x18 LxWxH
$132.00 - $512.00
Annovi Riverberi AR Pump Gear Box Made Ready 8 Gallons Per Minute. Many people are looking for options to change their pump from a direct drive or a belt drive assembly to a gear box assembly. This Gear Box Assembly is designed for you to install an alternative pump option for a motor you already have. This also includes Predator Motor Builds. Our Gear Box Assembly is already put together for you to save time and confusion. Our team properly installs and packs the gear box assembly to ship direclty to you! *DONT FORGET TO GET A PUMP SUPPORT BRACKET*We highly recommend picking up a pump support bracket to mount on the bottom of your pump. This will help relieve the tension and weight that is on the Gear Box from supporting the Pump. The HEAVIER THE PUMP. The More this is NECESSARY to ensure your unit doesn't have any issues long term. Please choose the appropriate option for your motor specs:GMR AR 8GPM B24 - AR Pump 8 Gpm XWAM8G35 Pump and GP B24 Gear Box Assembly for 1-1/8" Shaft Motors - IGX800, GX690GMR AR 8GPM B24P - AR Pump 8 Gpm XWAM8G35 Pump and GP B24P Gear Box Assembly for 1" Shaft Motors - GX390, GX630, Predator Motors Please see the images on this listing for basic installation instructions. If you are still unable to confidently install this pump, please take it to a reputable service center. Unfortunately, we are too busy fulfilling orders to stop and teach equipment maintenance and installation. Warranty and Installation NOTICE! These Gear Box Assembly Kits have the parts needed to correctly install the Pump and Gear Box to your motor. We have solved most of the confusion when buying a Gear Box from other suppliers. We have installed the gear box and the pump already for you. All you have to do is properly install the Gearbox Assembly to the motor crank shaft. Please ensure you choose the right gear box for your application. Pumps and Gear Box have oil in them and are ready to use! We recommend using STP Gear Oil 80w90 for the Gear box. STP 30w non Detergent for the pump. Installation Warranty: There is no warranty on improper installation of the gear box assembly. If you do not feel confident to install this on your own motor, we highly recommend taking it to a reputable service center to install it for you. Proper installation on these gear box assemblies is the most important thing you can do. Please message us for an approximate lead time on shipping before placing your order.
$1,411.00$1,211.00
The 1/2″ Stainless Steel Hose Reel Swivel is a premium live swivel designed for high-pressure hose reel applications. Built to handle demanding softwash and pressure washing systems, this swivel maintains full rotation under flow and pressure, minimizing hose kinking and wear. Includes: One 1/2″ stainless steel live swivel Precision ball-bearing construction for smooth rotation Compatible with most commercial hose reels Performance Specifications: Inlet/Outlet Size: 1/2″ FNPT Material: Stainless Steel Pressure Rating: Up to 5,000 PSI Temperature Range: –30°F to 400°F Rotation: Full 360° under pressure Seal Type: Internal O-rings for leak-free performance Key Benefits: Live swivel rotation prevents hose twisting during reel operation All stainless construction resists corrosion from bleach and chemicals High-pressure rated for softwash, pressure wash, and industrial use Fits most softwash and pressure wash hose reels Low-maintenance sealed design for long service life
$97.00
The 3/4” Stainless Steel Hose Reel Swivel is a premium live swivel designed for high-pressure hose reel applications. Built to handle demanding softwash and pressure washing systems, this swivel maintains full rotation under flow and pressure, minimizing hose kinking and wear. Includes: One 3/4” stainless steel live swivel Precision ball-bearing construction for smooth rotation Compatible with most commercial hose reels Performance Specifications: Inlet/Outlet Size: 3/4” FNPT Material: Stainless Steel Pressure Rating: Up to 5,000 PSI Temperature Range: –30°F to 400°F Rotation: Full 360° under pressure Seal Type: Internal O-rings for leak-free performance Key Benefits: Live swivel rotation prevents hose twisting during reel operation All stainless construction resists corrosion from bleach and chemicals High-pressure rated for softwash, pressure wash, and industrial use Fits most softwash and pressure wash hose reels Low-maintenance sealed design for long service life
$99.00
Adjustable Down Stream Soft Wash Nozzle M5DS THIS IS A MUST HAVE FOR ANYONE IN THE EXTERIOR CLEANING INDUSTRY WHO OFFERS SOFT WASHING Not only is the the best nozzle in the soft washing industry for applying chemical with a down stream injector, it is also AMAZING for rinsing with low pressure. Simply “TWIST” the nozzle for 0° to 60° spray patterns. No more switching tips! Apply detergent and rinse up to 4 stories when used in conjunction with your soap injector. ** AN UNDERSIZED ORIFICE WILL PRODUCE MORE PRESSURE AND LESS GPM AND AN OVERSIZED ORIFICE WILL PRODUCE LESS PRESSURE AND MORE GPM. WE HAVE GIVEN SUGGESTIONS ON WHAT ORIFICE SIZES CAN BE USED WITH DIFFERENT GPM MACHINES BUT WE STILL RECCOMEND PURCHASING AND TRYING TWO DIFFERENT SIZES AND PICKING YOUR FAVORITE. YOU’LL MOST LIKELY END UP FINDING AN APPLICATION FOR BOTH SIZE TIPS ANYWAY.
$87.00
After Wash Conditioner is utilized as a secondary rinse to neutralize corrosive bleach crystals on exterior surfaces and your cleaning equipment. After Wash Conditioner should be applied after EVERY roof cleaning service to completely neutralize bleach. Leaving any trace of active bleach on a roof could make asphalt shingles brittle, oxidize or corrode any metal on the roof, make tiles dull, or kill plants underneath the drip edge Use After Wash Conditioner to spray shrubbery and outdoor (non-edible) plants before and after the use of bleach. This aids in protecting plants during and after exposure to bleach. Always rinse plants thoroughly with water after applying this product. Do NOT leave After Wash Conditioner to dry on plants. A regular spray down with After Wash Conditioner at the end of the day will neutralize bleach crystals on equip-ment, trailers and vehicles, helping to protect from rapid corrosion. Pumps, sprayers, hoses and fittings can also be flushed with After Wash Conditioner, thus stopping premature repairs and replacement. DIRECTIONS FOR USE Pre-rinse any plants or grass to be treated. Mix 1/2oz. per gallon of water for pump sprayers and dedicated pump application. Mix 1oz. per gallon of water for X-Jet application. Mix 5oz per gallon of water for downstream injector application. Rinse plants and surfaces thoroughly with water after application. DISCLAIMER Gently Wash Products LLC & Outdoor Cleaning Store make no warranties for this product and in no case shall be liable for any kind of damages resulting from the use or handling of this product. The terms of this disclaimer cannot be varied by any written or verbal statements at the point of sale or elsewhere. CLICK HERE FOR PRODUCT SDS SHEET
$14.00 - $770.00
Aluminum Drum Wrench Fits 2 in and 3/4 in Bung Caps
$57.00
Aluminum mounting pump plate used on our 12 Volt pump modules. Matches up to our aluminum stand. Dimensions 15.5"×12" tall. Just choose the GPM.
$181.00$131.00
Aluminum Skid For Gear Drive Builds Machines these days pack a serious punch and have a ton of torque. An unreliable or extremely heavy skid is going to fall flat on its face in the long run and that will leave you in quite a bind. These pressure washing mounting skids are made using the best aluminum materials and welding techniques to ensure gear drives have a unique well built solid foundation. The Measurements:Total Space 27" x 16" x 3"Safe Mounting Space 21" x 12"
$286.00
This stack rack is designed to stack your pressure washer units on top of each other. These are perfectly set up for Gear Drive Units, but will work with many other alternatives. Make sure to look at the photos and measure to ensure measurements will work for your rig or units. 25.5in x 33.5in x 15in working space inside the stack rack. Measurements: Height - 27.5 in (25.5 Inside) Length - 35in (33.5 Inside) Width - 16in (15in Inside) Weight: 33lb
$812.00$712.00
DESIGNED TO FIT YOU - The goggles' soft rubber sealing molds perfectly to the shape of any face, eye protection from all sides. Smartly aligned ventilation slots, which are covered by the lens, ensure good airflow and prevent flying particles from entering the inside of the goggles. An adjustable headband provides individual and firm fit. SOLID. RETINA EDGE COATED LENSES - Due to the special coating, our protective eyewear is highly scratch resistant, will not fog up and protects against harmful UV rays. Our Safety Goggles are certified according to US ANSI Z87+ and German DIN EN 166 & EN 170. MOST COMFORTABLE - Ultimate wearing comfort is created by a soft rubber sealing, so say goodbye to painful pressure points. Safety goggles over glasses that combine complete protection with a panoramic view - protection from all sides without limitations! BEST MATERIALS, BEST CHOICE - Say goodbye to chemical odors and skin irritations! We only use skin-pleasing, skin-neutral substances. Meaning, the anti fog, anti scratch lens give perfect protection and next-to-skin comfort.
$29.00
AR 4000PSI @ 4GPM Bare Pump 1450rpm RG1528HN
$542.00
AR PUMP 5.5 GPM @ 3500 PSI 1450rpm RG2125HN RG2125HN Pump Only
$542.00
The AR North America XWAM8G35N plunger pump is useful for a variety of different high-pressure washing applications. Its die-cast design, forged brass head, and durable inner components make it an excellent choice for industrial and commercial use. Part of the XWAM Series of pumps, the XWAM8G35N model has a max flow rate of 8 gpm and a max pressure of 3500 PSI. This quality plunger pump has a 3/4" female inlet, a 3/8" female outlet, and a 32 oz. oil capacity. Specifications: 8 GPM maximum flow rate 3500 PSI maximum pressure 1750 RPM 20mm bore diameter 19.8mm stroke 3/4" female inlet 3/8" female outlet 140° Fahrenheit maximum temperature 32 oz. oil capacity 24mm solid shaft Crankshaft ID Stamp: 1 Features: Forged brass manifold Machined brass valves Specially designed Ultra-Form cages High-pressure "V" packing style Buna-N seals Low-pressure "U" Buna-N seals Oversized taper roll bearings Precision die-cast bearing support, crankcase, and rear covers Stainless steel plunger rods Oversized precision ground and hardened steel rod pins One-piece connecting rods Forged, precision-ground crankshaft Triple lip oil seals and o-rings
$824.00
The AR North America RTX60 is a reliable triplex plunger pump delivering up to 1450 RPM and 15.8 GPM. The pump is designed for maximum longevity, including a high-strength solid steel pump shaft and low friction zinc-aluminum alloy connecting rods. The RTX60 pump has a 1" female inlet and 1/2" female outlet. It can be coupled to multiple motors either directly or through use of a flexible joint. Choose this hardworking pump for industrial applications including cleaning systems! Features: Maximum flow: 15.8 GPM Maximum pressure: 4350 PSI Maximum speed: 1450 RPM Maximum temperature: 140° F Oil capacity: 76 oz. Stroke: 28 mm Bore: 25 mm diameter 30 x 80 shaft size Three-piston plunger design Inlet: 1" female Outlet: 1/2" female Die-cast aluminum alloy pump body and cover Rear cover features oil drain outlet High-strength steel shaft Oversized friction bearings One-piece ceramic pistons Double gasket sealing system Intake and delivery valve plugs AR North America item #RTX60 Weight: 72 lbs.
$2,310.00
The AR North America RTX70 is a reliable triplex plunger pump delivering up to 1450 RPM and 18.5 GPM. The pump is designed for maximum longevity, including a high-strength steel pump shaft and low friction zinc-aluminum alloy connecting rods. Easily connect it to your system via the 1" female inlet and 1/2" female outlet - it's a great choice for industrial cleaning applications! Features: Maximum flow: 18.5 GPM Maximum pressure: 2000 PSI Maximum speed: 1450 RPM Maximum temperature: 140° F Oil capacity: 76 oz. Stroke: 23 mm Bore: 30 mm diameter Three-piston plunger design Inlet: 1" female Outlet: 1/2" female Die-cast aluminum alloy pump body and cover Rear cover features oil drain outlet High-strength steel shaft Oversized friction bearings One-piece ceramic pistons Double gasket sealing system Intake and delivery valve plugs AR North America item #RTX70 Weight: 72 lbs.
$2,310.00
AR45 Honda Softwash System Choose Between Pull Start Or Electric Start The Gas Powered Soft Wash System with Premium AR45 Diaphragm Pump. These systems are often used for roof cleaning, residential & commercial soft washing and high volume rinse applications. Pump Specifications:Max GPM: 11.4Max Pressure: 290 PSIMax RMP: 550Max Fluid Temperature: 140 Deg F35 mm (1-1/4″) Suction1″ Outlet3/4″ Bypass ****Warranty is void for over pressurization and improper maintenance. SH and other harsh chemicals wear and tear greatly on the life of these machines! Clean and Neutralize after each use! The AR-45 is a very strong softwash unit that handles a lot of materials. This unit is fantastic for wash down or for roof cleaning set ups. Please message us for an approximate lead time on shipping before placing your order.
$1,996.00 - $2,261.00
AR45 Softwash Skid with CRX Motor The Gas Powered Soft Wash System with Premium AR45 Diaphragm Pump. These systems are often used for roof cleaning, residential & commercial soft washing and high volume rinse applications. 300 PSI, 10 GPM CRX 208cc Engine High Volume AR 45 Diaphragm Pump Gear Driven Bolt-On Regulator Pressure Gauge Heavy Duty Aluminum Skid Frame Pump Specifications:Max GPM: 11.4Max Pressure: 290 PSIMax RMP: 550Max Fluid Temperature: 140 Deg F35 mm (1-1/4″) Suction 1/2″ Outlet3/4″ Bypass ****Warranty is void for over pressurization and improper maintenance. SH and other harsh chemicals wear and tear greatly on the life of these machines! Clean and Neutralize after each use! The AR-45 is a very strong softwash unit that handles a lot of materials. This unit is fantastic for wash down or for roof cleaning set ups. Please message us for an approximate lead time on shipping before placing your order.
$1,879.00
Ultra Skid Belt Drive Mounted Professional Pressure Washers Commercial Pressure Washer. Bandit 8gpm at 4000psi Honda IGX 800 with Comet Pump. FEATURES: Honda Engines with low oil protection Genuine Honda muffler Premium Series industrial Comet triplex pump with lifetime manifold warranty Block mounted high flow unloader for single or dual gun applications Ultra rugged corrosion resistant extruded aluminum base Easy access two piece belt guard 4-groove "Bandit" belt for uniform tension and maximum power transfer "EZ-line" belt tension system Easy engine and pump oil drain systems Quad anti-vibration rubber isolators PSI pressure washers feature Comet pumps for their unmatched quality and life. PUMP FEATURES Forged brass manifold with lifetime warranty Forged one-piece bronze alloy connecting rods High efficiency, stainless steel check valves Abrasion proof, heat resistant, solid ceramic plungers Premium quality oversized tapered roller bearings Increased fin depth for maximum heat dissipation Large crankcase capacity for improved cooling Special PSI offering: 1 year Bumper-to-Bumper warranty on entire pump, includes all normal wear items SPECIFICATIONS B-K8040HC 4000 PSI 8.0 GPM New Honda IGX800 Engine Comet Pump 34" x 18" x 22" 230 lbs. CALL AHEAD TO CONFIRM INVENTORY BEFORE PLACING YOUR ODER. THESE MAY SHIP MANUFACTURER DIRECT SO PLEASE TOUCH BASE WITH US FIRST TO CONFIRM LEAD TIMES.
$5,562.00$4,762.00
Bandit 10 gpm at 3500 psi Honda IGX800 With Comet Pump Ultra Skid Belt Drive Mounted Professional Pressure Washers FEATURES • Honda Engines with low oil protection• Genuine Honda muffler•Premium Series industrial Comet triplex pump with lifetime manifold warranty• Block mounted high flow unloader for single or dual gun applications• Ultra rugged corrosion resistant extruded aluminum base• Easy access two piece belt guard• 4-groove "Bandit" belt for uniform tension and maximum power transfer• "EZ-line" belt tension system• Easy engine and pump oil drain systems• Quad anti-vibration rubber isolators PSI pressure washers feature Comet pumps for their unmatched quality and life. PUMP FEATURES • Forged brass manifold with lifetime warranty• Forged one-piece bronze alloy connecting rods• High efficiency, stainless steel check valves• Abrasion proof, heat resistant, solid ceramic plungers• Premium quality oversized tapered roller bearings• Increased fin depth for maximum heat dissipation• Large crankcase capacity for improved cooling Special PSI offering: 1 year Bumper-to-Bumper warranty on entire pump, includes all normal wear items SPECIFICATIONSB-K1035HC 3500 PSI 10.0 GPMNew Honda IGX800 Engine Comet PS8010 Pump34" x 18" x 22" 230 lbs. Please message us for an approximate lead time on shipping before placing your order.
$5,004.00
Belt Drive Pressure Washer for professionals. Up to 4000 PSI Up to 5.5 GPM Honda Engine Comet Triplex Pump Available in pull start or electric start Includes pressure washing hose, pressure washing gun, and tip set Lead time is approximately 2 weeks. Premium Series Industrial Comet triplex pump• GPM: 4.0 GPM• PSI: 4000 PSI• Engine: Honda GX390• Start Type: Pull Start• Pump: RW4040S• Tires: 13″• Unit Weight: 144 lbs• Dimensions: 43″ x 26″ x 27″
$2,696.00$2,196.00
Bandit 5.5GPM at 3000PSI Honda GX390 Belt Drive With Comet Pump FEATURES:Honda Engines with low oil protectionPremium Series industrial Comet triplex pump with external unloader and bypassUltra-lightweight aluminum frame Easy access two piece belt guard3-groove Bandit belt for uniform tension and maximum power transferEZ-line belt tension systemAdjustable pressureThermal relief protectionEasy engine oil drain system50 mesh stainless steel inlet filterDual anti-vibration rubber isolators Units include 50' steel braided non-marking gray hose, 36 spray wand with molded grip and gun, 5 quick connect spray nozzles, and a high draw chemical injector. Hose reel kits and other options are available. PUMP FEATURES:Forged brass manifold with lifetime warrantyForged one piece bronze alloy connecting rodsHigh efficiency, stainless steel check valvesAbrasion proof, heat resistant, solid ceramic plungersPremium quality oversized tapered roller bearingsIncreased fin depth for maximum heat dissipationLarge crankcase capacity for improved cooling Special PSI offering:1 year Bumper-to-Bumper warranty on entire pump includes all normal wear items SPECIFICATIONS:Honda GX390 Comet RW5535 Pump144 lbs. Please message us for an approximate lead time on shipping before placing your order.
$2,128.00 - $2,478.00
Bandit 8 gpm at 3500 psi Honda GX690 With General Pump Ultra Skid Belt Drive Mounted Professional Pressure Washers FEATURES • Honda Engines with low oil protection• Genuine Honda muffler•Premium Series industrial General Pump• Choose Unloader • Ultra rugged corrosion resistant extruded aluminum base• Easy access two piece belt guard• 4-groove "Bandit" belt for uniform tension and maximum power transfer• "EZ-line" belt tension system• Easy engine and pump oil drain systems• Quad anti-vibration rubber isolators PSI pressure washers feature Comet pumps for their unmatched quality and life. Special PSI offering: 1 year Bumper-to-Bumper warranty on entire pump, includes all normal wear items SPECIFICATIONS3500 PSI 8.0 GPMHonda GX690 Engine General Pump34" x 18" x 22" 210 lbs. Please message us for an approximate lead time on shipping before placing your order.
$4,496.00 - $4,796.00
Banjo 1”x1” Y strainer Fiberglass-reinforced polypropylene Polypropylene-ribbed 316 stainless steel screens EPDM gaskets Easy grip end cap with heavy-duty threads Cleanout plug in the bottom for draining Strainers are FNPT x FNPT Corrosion-resistant Maximum pressure: 150 psi @ 70°F
$37.00
Banjo 3-Way 1/2" Micro Valve - FKM
$36.00
3/4” Female Camlock with 1/2” FPT
$22.00
Banjo 3/4” Female Cam Lock 1/2” MPT
$22.00
Banjo 3/4” Female Cam Lock 3/4” MPT
$22.00
Banjo Female Camlock 1/2” Barb Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. Glass filled polypropylene with EPDM gaskets Stainless steel rings, arms & pins For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$22.00
Banjo Female Camlock 3/4” Barb Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. Glass filled polypropylene with EPDM gaskets Stainless steel rings, arms & pins For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$22.00
Banjo Male Camlock 1/2” Barb Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$19.00
Banjo Male Camlock 1/2” Threaded Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$19.00
Banjo Male Camlock 3/4” Barb Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$19.00
Banjo Male Camlock 3/4” Threaded Banjo camlock fittings are great for bypassing your hose reels or using with suction lines. Quick-disconnect couplings provide fast, positive, leak proof connections for hose and pipe without threading, tools, and strain in seconds. Use when handling chemicals, other liquids, or dry chemicals. With adapter and coupler secured to the end connections, simply insert adapter into coupler and pull down cam arm to lock assembly. For handling chemicals, other liquids & dry chemicals Not UV resistant Interchangeable with all types of cam lever fittings Max. working pressure @ 70°F: 300 psi Temperature range: 0°F to 150°F Made in the USA
$17.00
Brass Allen Head Plugs
$13.00
Brass Hex Coupler Choose your size
$17.00
Brass Hex Nipples CHOOSE YOUR SIZE
$13.00
With over a decade of exterior cleaning industry experience, we can confidently guide you in the right direction with your next purchase. We specialize in building custom pressure washing and soft washing rigs and can also help you piece together the equipment and parts you need to do it yourself. Give us a call or chat online!
